Why a 21mm insert can make your wearable pump more comfortable
If your wearable pump came with 24mm flanges but your nipple size is closer to 21mm, you do not need to replace the entire flange. A 21mm flange insert sits inside the 24mm flange to create a better fit. The BabyBuddha 21mm Flange Inserts are designed to help moms achieve proper alignment, improved comfort, and optimized milk expression when using their BabyBuddha pumps. They are compatible with the BabyBuddha 2.0 and 3.0 Pump when used with 24mm EasyFit Flanges, and with the BabyBuddha Wearable Breast Pump.
A better fit can reduce friction and support better nipple alignment for more effective milk removal. If 21mm is your best fit, these inserts help customize your setup without replacing your entire flange.
How to insert and check the fit of your 21mm flange inserts
Follow these steps to seat the insert correctly and confirm it feels right before you start pumping.
- 1. Wash your hands and the insert: Start with clean hands and a clean insert. The inserts are easy to insert, remove, and clean.
- 2. Seat the insert inside the 24mm flange: Press the soft, flexible insert into the flange so it sits evenly around the opening. The insert is designed to create a custom, comfortable fit.
- 3. Center your nipple: Align your nipple in the center of the insert. Proper alignment supports more effective milk removal and reduces friction.
- 4. Check comfort during pumping: You should feel a gentle pull, not pinching or rubbing. If it feels uncomfortable, stop and adjust the insert or check your sizing.
Fit tips for 21mm inserts in a wearable pump
A 21mm insert is only helpful if it matches your size. If you are between sizes or unsure, start with the size you already know works for you. The insert should not pinch or leave red marks. It should feel snug but not tight. If you feel pain or your milk output drops, the insert may be too small or not seated correctly.
Because wearable pumps rely on good suction and alignment, make sure the insert is fully pushed into the flange and sits flat. A crooked insert can break the seal and reduce effectiveness. Also check that your pump bra is holding the flange securely against your breast; a loose bra can cause the insert to shift.
How to clean and care for your flange inserts
Clean your inserts after each use to keep them hygienic and in good condition. Wash with warm, soapy water and allow them to air dry. The inserts are safe for standard sterilization methods. Avoid harsh chemicals or abrasive brushes that could damage the soft material.
Inspect the inserts regularly for tears, discoloration, or stiffness. Replace them if they show signs of wear, as worn inserts may not seal properly and can affect suction.
BabyBuddha 21mm Flange Inserts at a glance
- Flange Inserts – 21mm (2-pack) for Wearable Breast Pump and 24mm Flanges: Compatible with BabyBuddha 2.0 and 3.0 Pump (when used with 24mm EasyFit Flanges) and BabyBuddha Wearable Breast Pump. Confirms which pumps and flanges these inserts work with, so you can check your setup before buying.

Flange Inserts – 21mm (2-pack) for Wearable Breast Pump and 24mm Flanges - Flange Inserts – 21mm (2-pack) for Wearable Breast Pump and 24mm Flanges: Soft, flexible design for a comfortable, customizable fit. Explains why the insert can improve comfort during pumping.
- Flange Inserts – 21mm (2-pack) for Wearable Breast Pump and 24mm Flanges: Easy to insert, remove, and clean. Makes daily use and maintenance simpler.
- Flange Inserts – 21mm (2-pack) for Wearable Breast Pump and 24mm Flanges: Wash with warm, soapy water after each use and allow to air dry. Gives you a clear cleaning routine to follow.
- Flange Inserts – 21mm (2-pack) for Wearable Breast Pump and 24mm Flanges: Safe for standard sterilization methods. Lets you sterilize the inserts as needed for hygiene.
When to replace your 21mm flange inserts
Replace your inserts if they become damaged, stretched, or no longer fit securely in the flange. Signs of wear include tears, cloudiness, or a loose fit that causes suction loss. Because the inserts are soft and flexible, they may degrade over time with repeated washing and sterilization. Keeping a spare set on hand can help you avoid interruptions.


