Start with what a flange actually does
A flange, also called a breast shield, is the funnel-shaped piece that fits over your nipple and forms a seal around your areola. It creates the vacuum that gently draws your nipple into the funnel for milk removal. Fit matters because the seal and the pull both depend on the funnel sitting correctly, and the kit's own guidance notes that depending on your nipple size, you may need an insert for a better fit.
That last point is the reason a three-size kit is useful. Instead of committing to one funnel measurement before you know how it feels in use, you get a small range to compare. The Original Flange Kit comes in 24mm, 28mm, and 32mm, so your first job is to work out which of those three is closest to your needs.
How to pick your starting size from the kit
Treat the first session as a comparison, not a final decision. Use the same pump and the same routine so the only variable is the flange.
- 1. Measure before you pump: Measure your nipple rather than guessing from your bra size or pre-pregnancy size. The kit links to a fit guide for this reason; use a measurement as your starting point, not a feeling.
- 2. Match your measurement to the closest kit size: The kit offers 24mm, 28mm, and 32mm. Pick the size closest to your measurement as your first trial flange, and keep the other two within reach for the same session.
- 3. Check the seal first: The flange should form a seal around your areola so the vacuum can draw your nipple into the funnel. If the seal keeps breaking or you are pressing the flange against yourself to hold it, that size is not working for you.
- 4. Watch how much areola is pulled in: The kit's own wording is that you may need an insert for a better fit depending on your nipple size. If the funnel feels oversized for your nipple, an insert is the alternative to jumping to a different flange size.
- 5. Compare, then commit: Try your closest size first, then the next size up or down in a later session. Keep the size that seals comfortably and needs the least adjusting mid-session.
Signs it is worth switching to another size in the kit
Because the kit gives you three funnels, switching is cheap in time and effort. Switch when the current flange keeps losing suction, when you have to hold it in place for the whole session, or when the funnel feels clearly too large or too small for your nipple. Those are fit signals, not pump problems, and they are exactly what a multi-size kit is designed to solve.
One honest limit: the supplied product information does not include a comfort checklist, a measurement method, or a rule for how long to trial a size. Use your own comfort and seal as the deciding evidence, and if fit remains unclear, the kit's linked fit guide is the right next step rather than more guessing.
Flange or insert? A simple trade-off
Both routes change how the funnel meets your body. The kit's guidance explicitly allows for inserts, so you do not have to treat the three flanges as your only options.
- Switch flange size: Best when your measurement sits near 24mm, 28mm, or 32mm and the seal is the main problem. You get a whole new funnel rather than adding a piece.
- Add an insert: Useful when the funnel is larger than your nipple needs. The kit notes inserts as a fit option depending on nipple size, so this is a supported path, not a workaround.
- Do both over time: Sizing can change, and a kit lets you keep a spare size on hand while you use an insert with another. That flexibility is the practical reason to own three sizes rather than one.
What the Original Flange Kit includes
- Original Flange Kit (3 Sizes): The kit includes massage cushions, with the 32mm flange excluded from that inclusion. If the cushions are part of why you are buying, check which size you are choosing before you order.

Original Flange Kit (3 Sizes) - Original Flange Kit (3 Sizes): Available flange sizes are 24mm, 28mm, and 32mm. These are the three funnels you can compare, so your first decision is which of them to start with.
- Original Flange Kit (3 Sizes): The flange forms a seal around your areola and creates a vacuum that draws your nipple into the funnel for milk removal. This is the mechanism a poor fit disrupts, which is why the seal is your main checkpoint when switching.
Keeping your flanges working between size changes
The kit's guidance is straightforward: you can extend the life of your flange by cleaning it thoroughly after each use. Cleaning is also what keeps your comparison fair, since a flange that is not clean may not seal the way a fresh one does.
Replacement is on a schedule rather than a feeling. The supplied information says to replace breast pump flanges every 6-12 months, and that even a well-cared-for flange will need to be replaced after 12 months of use. If you are rotating between three sizes, note when each one entered service so you are not comparing a new funnel against a worn one.
A practical routine for your first week with the kit
Keep the process small enough to repeat. The goal is one clear answer about which size or insert combination works.
- Label each flange: Mark 24mm, 28mm, and 32mm so you are not relying on memory mid-session. The kit's three sizes are easy to mix up once they are out of the box.
- Change one thing at a time: Compare flanges in separate sessions rather than swapping mid-pump. That way a lost seal points to the flange, not to the switch.
- Record what you noticed: A one-line note per session, such as seal held or needed adjusting, gives you a pattern to act on.
- Recheck after cleaning: Since thorough cleaning after each use is the recommended care, confirm the seal still holds once the flange is clean and dry.
- Revisit the fit guide if you are stuck: The kit points to a fit guide. Use it when your own comparison does not settle the question.
Buying the kit
- Original Flange Kit (3 Sizes): The Original Flange Kit (3 Sizes) is listed at USD 17.74, with a catalog comparison price of USD 24.99. Three sizes in one purchase is the practical argument for a kit over buying funnels one at a time while you work out your fit.


