When a 13mm insert is the right buy
If your pump setup uses 24mm flanges and you suspect the opening is too large, a 13mm flange insert is the smallest option in this insert range. The BabyBuddha 13mm Flange Inserts (2-pack) are designed to customize a 24mm flange setup rather than replace the whole flange, so they are worth considering when you want a smaller opening without buying a new flange system.
The buying decision comes down to two checks: whether 13mm is genuinely your best fit, and whether your pump and flange combination is listed as compatible. The inserts are compatible with the BabyBuddha 2.0 and 3.0 Pump when used with 24mm EasyFit Flanges, and with the BabyBuddha Wearable Breast Pump. If you use a different brand or a non-24mm flange, these inserts are not confirmed for your setup.
What the 13mm inserts are designed to do
- Improve alignment: The inserts support better nipple alignment, which is the main reason to size down inside a 24mm flange.
- Reduce friction: The soft, flexible silicone design is intended to improve comfort and reduce friction during pumping.
- Customize without replacing: If 13mm is your best fit, the inserts let you adjust your existing 24mm flange setup instead of buying a new flange.
- Keep cleaning simple: The inserts are easy to insert, remove, and clean, which matters for a part you will handle every session.
BabyBuddha 13mm Flange Inserts at a glance
- Flange Inserts – 13mm (2-pack) for Wearable Breast Pump and 24mm Flanges: 13mm Flange Inserts (2-pack) designed for use with 24mm flanges. The 13mm size is the key buying constraint: it is a small insert intended to narrow a 24mm opening, not a universal fit.

Flange Inserts – 13mm (2-pack) for Wearable Breast Pump and 24mm Flanges - Flange Inserts – 13mm (2-pack) for Wearable Breast Pump and 24mm Flanges: Compatible with BabyBuddha 2.0 and 3.0 Pump when used with 24mm EasyFit Flanges, and with the BabyBuddha Wearable Breast Pump. Compatibility depends on both the pump and the flange, so check your exact combination before ordering.
- Flange Inserts – 13mm (2-pack) for Wearable Breast Pump and 24mm Flanges: Soft, flexible design intended to help improve comfort and reduce friction during pumping. Comfort is the main reason to try an insert before replacing your entire flange setup.
- Flange Inserts – 13mm (2-pack) for Wearable Breast Pump and 24mm Flanges: Wash with warm, soapy water after each use and allow to air dry. The inserts are a reusable part with a simple care routine, so plan for washing after every session.
How to judge whether 13mm is your best fit
Proper flange sizing is key to comfortable and effective pumping, and the insert only helps if the size matches you. The supplied sizing guidance stops at the importance of correct sizing; it does not include a measuring method or a fit checklist. That absence is a real limitation of the product information, not a reason to guess.
A practical approach is to treat 13mm as a candidate size, not an automatic answer. If you already know from your own pumping experience that a smaller opening is more comfortable and better aligned, these inserts are the logical next step. If you are unsure between sizes, buying a single small size is a risk: the 2-pack gives you a spare, but it does not give you a second size to test.
Insert versus replacement flange: the trade-off
- 13mm flange inserts: Lower-cost way to customize an existing 24mm flange setup. You keep your current flanges and add a soft, flexible insert. Best when 13mm is your fit and your pump/flange combination is listed as compatible.
- Replacement flange in a smaller size: A different purchase with its own sizing and compatibility questions. The supplied information does not confirm a 13mm replacement flange option, so do not assume one exists in the same range.
- Staying with your 24mm flange: The right choice if 24mm is comfortable and effective for you. An insert adds a part to clean and handle, so it should solve a real fit problem rather than be added by default.
A simple pre-purchase check
- Confirm your flange size: Check that your current flanges are 24mm. The inserts are designed for 24mm flanges, and the compatibility note specifically names 24mm EasyFit Flanges for the BabyBuddha 2.0 and 3.0 Pump.
- Confirm your pump: The inserts are listed for the BabyBuddha 2.0 and 3.0 Pump (with 24mm EasyFit Flanges) and the BabyBuddha Wearable Breast Pump. If your pump is not listed, compatibility is not confirmed by the supplied information.
- Decide whether 13mm is plausible for you: The inserts are the smallest size in this insert range. If you have reason to believe a smaller opening suits you, they are worth trying; if not, start by reviewing your current fit instead.
- Plan for care: Wash with warm, soapy water after each use and allow to air dry. The inserts are also described as safe for standard sterilization methods.
Honest limits before you buy
The supplied information does not include a measuring method, a fit checklist, or guidance on how long an insert should last before replacement. It also does not confirm compatibility with pumps or flanges beyond those named. Those are real gaps in the product data, and they matter because a flange insert is a fit-dependent purchase.
What the information does support is a clear use case: a 2-pack of 13mm inserts for 24mm flanges, intended to improve alignment and comfort, compatible with specific BabyBuddha setups, and easy to clean. If that matches your situation, the inserts are a focused way to adjust your setup. If your pump or flange is not listed, or you are still deciding between sizes, treat the purchase as unconfirmed rather than assuming it will fit.


