Who 17mm flange inserts are for
If your nipple measures closer to 17mm but your pump came with 24mm flanges, a full flange replacement can feel like overkill. The BabyBuddha 17mm Flange Inserts are made for exactly that situation: they sit inside a 24mm flange to create a smaller opening, so you can customize your setup without buying a whole new flange.
These inserts are a fit solution, not a one-size-fits-all upgrade. They help when 17mm is your best fit, and they are designed to support better nipple alignment and reduce friction during pumping. If you have not confirmed your size, start with a proper flange sizing check before ordering.
What the 17mm inserts are designed to do
- Flange Inserts – 17mm (2-pack) for Wearable Breast Pump and 24mm Flanges: Designed to help moms achieve proper alignment, improved comfort, and optimized milk expression when using their BabyBuddha pumps. These are the core benefits you are buying: a more comfortable, better-aligned pump session rather than a decorative accessory.

Flange Inserts – 17mm (2-pack) for Wearable Breast Pump and 24mm Flanges - Flange Inserts – 17mm (2-pack) for Wearable Breast Pump and 24mm Flanges: Helps improve comfort and reduce friction during pumping. Less friction can make longer or more frequent sessions feel more manageable, especially if your current 24mm flange feels too large.
- Flange Inserts – 17mm (2-pack) for Wearable Breast Pump and 24mm Flanges: Supports better nipple alignment for more effective milk removal. Alignment is a practical reason to size down: a centered nipple can help the pump work as intended.
- Flange Inserts – 17mm (2-pack) for Wearable Breast Pump and 24mm Flanges: Soft, flexible design for a comfortable, customizable fit. The flexible material is part of the comfort story, but it also means the insert should be seated carefully so it stays in place.
Compatibility: which pumps and flanges work with these inserts
The 17mm Flange Inserts are listed as compatible with the BabyBuddha 2.0 and 3.0 Pump when used with 24mm EasyFit Flanges, and with the BabyBuddha Wearable Breast Pump. In each case, the insert is meant to be used inside a 24mm flange to narrow the opening.
That compatibility detail matters when you are buying: these inserts are not a universal fit for every flange on the market. Check that you are using a 24mm flange from the listed BabyBuddha setups before you order. If you are using a different brand or a different flange size, the supplied information does not confirm compatibility.
Insert vs. replacement flange: a simple trade-off
Both approaches can get you to a smaller opening, but they solve the problem differently.
- 17mm flange inserts: A lower-commitment way to customize your existing 24mm flange. The inserts are easy to insert, remove, and clean, and they let you keep the flange you already have. They are also small enough to be practical for wearable pump setups.
- A dedicated smaller flange: Replaces the flange entirely rather than adding an insert. The supplied information does not include a dedicated 17mm flange, so this guide cannot compare specific replacement-flange options. If you prefer a one-piece setup, check the full flange range separately.
How to use and care for your 17mm inserts
The inserts are simple to live with, but a little routine goes a long way.
- Seat the insert before pumping: Place the 17mm insert inside your 24mm flange so it sits evenly. The soft, flexible design is meant to create a comfortable, customizable fit, but it should be positioned securely before you start.
- Clean after each use: Wash with warm, soapy water after each use and allow to air dry. This is the supplied care instruction, and following it keeps the inserts ready for your next session.
- Store them with your pump parts: Because the inserts are small and easy to remove, keep them with your flanges so they do not get lost between sessions. The inserts are listed as safe for standard sterilization methods.
Product details at a glance
- Flange Inserts – 17mm (2-pack) for Wearable Breast Pump and 24mm Flanges: 17mm Flange Inserts (2-pack) for Wearable Breast Pump and 24mm Flanges. The 2-pack gives you a spare set, which is useful if one insert is drying or temporarily misplaced.
- Flange Inserts – 17mm (2-pack) for Wearable Breast Pump and 24mm Flanges: Easy to insert, remove, and clean. Low-maintenance parts are easier to keep in a daily pumping routine.
- Flange Inserts – 17mm (2-pack) for Wearable Breast Pump and 24mm Flanges: If 17mm is your best fit, these inserts help customize your setup without replacing your entire flange. This is the clearest buying rule: confirm 17mm is your size first, then use the inserts to adapt your existing 24mm flange.
When to skip the inserts
These inserts are not the right choice if your best fit is not 17mm, or if you are not using a compatible 24mm BabyBuddha flange. They are also not a substitute for checking your size: the supplied information does not include a measuring method, so use a proper sizing guide or professional guidance to confirm your fit.
If you are looking for a full replacement flange rather than an insert, the supplied records for this product do not cover that option. In that case, compare dedicated flange sizes separately before buying.


